Hardware
Cabinet Hardware
| Item | Style | Price |
|---|---|---|
| 19" Tilt-back legs, set of 2 (Stops and hardware included) As used on the Super Reverb® and Showman® cabs |
A | Click for Price |
| 16" Tilt-back legs, set of 2 (Stops and hardware included) As used on the Twin Reverb®, Bassman® and Bandmaster® cabs |
B | Click for Price |
| 14" Tilt-back legs, set of 2 (Stops and hardware included) As used on the Tremolux® cabs |
C | Click for Price |
| Tilt-back leg stops, set of 2 As used on modern and blackface tilt-back legs |
Click for Price | |
| Tilt-back leg stops, set of 2 As used on blonde/brown era tilt-back legs |
Click for Price | |
| Large Fender® Chassis Strap, 5", set of 2 (Bolts included) As used on the Bassman, Twin Reverb®, Super Reverb®, etc. |
D | Click for Price |
| Medium Fender® Chassis Strap, 4", set of 2 (Bolts included) As used on the Deluxe Reverb®, Vibrolux Reverb®, Princeton®, etc. |
E | Click for Price |
| Small Fender Chassis Strap, 3", set of 2 (Bolts included) As used on the Champ, Bronco®, Vibro Champ® |
F | Click for Price |
| Thumb Screws for Fender® piggyback speaker cabinets, Set of 2 | G | Click for Price |
| Thumb Screw Bushing, (Cabinet Receptacle) Set of 2 | H | Click for Price |
| Sliding Head Clamps for Fender® piggyback heads, set of 2 (mounting hardware included) | I | Click for Price |
| Jack plate assembly for Fender® cabs, (jack plates and #L12A Switchcraft Jack) | Click for Price | |
| Corner Protectors with lip, set of 4 (Screws Included), Just like the old Fender corners w/ recessed screw holes and oval head screws. | J | Click for Price |
| Corner Protectors without lip, set of 4 (Screws Included) | K | Click for Price |
| Amp Glides, Chrome w/ black Rubber Grommet, set of 4 (Screws included) | L | Click for Price |
| Amp Glides, nail-in style, set of 4 | M | Click for Price |
| Amp Glides, 3 prong hammer-in, set of 4, for small Fender amps | N | Click for Price |
| Caster, Fender® replacement w/o socket | O | Click for Price |
| Casters, plug in style w/ sockets, set of 4 | P | Click for Price |
| Power Cord/Reverb Cable Tie Down w/ screw, white | Click for Price | |
| Capacitor Can cover, Deluxe Reverb Reissue, 5 3/4" x 3" mounting centers | Click for Price | |
| Capacitor Can cover, Twin Reverb Reissue, 7" x 3 1/2" mounting centers | Click for Price | |
| 10" Tone Ring | Click for Price | |
| 12" Tone Ring | Click for Price | |
| 15" Tone Ring | Click for Price |
| Item | Style | Price |
|---|---|---|
| MarshallTM black plastic corner protectors, front (set of 4) | Out Of Stock | |
| MarshallTM black plastic corner protectors, back (set of 4) | Out Of Stock | |
| MarshallTM black plastic corner protectors, left/right for slant cabs (set of 2) | OUT OF STOCK | |
| MarshallTM plastic cabinet handles for 4 x 12 cabs | Out Of Stock | |
| MarshallTM metal cabinet handles for 4 x 12 cabs | OUT OF STOCK | |
| MarshallTM small plastic cabinet handles as used on mini stacks | Out Of Stock | |
| MarshallTM4 x 12" cab input jack assembly (includes jacks, mono/stereo switch, and wiring harness) | Out Of Stock | |
| MarshallTM anti-skid tray | Out Of Stock | |
| MarshallTM caster cups (set of 4) | OUT OF STOCK | |
| MarshallTM caster w/ socket | Out Of Stock | |
| MarshallTM amp feet, modern style (set of 4) | Out Of Stock |
| Item | Style | Price |
|---|---|---|
| Vox metal corner protectors (set of 4) | Click for Price | |
| Ampeg suitcase clips, latches for flip-top Ampegs | Click for Price |
| Item | Style | Price |
|---|---|---|
| Chassis bolt, 3 ¼" phillips oval head, 8-32 thread, exact Fender® replacement | A | Click for Price |
| Chassis bolt, 3 ¼" phillips oval head, 8-32 thread | B | Click for Price |
| Chassis bolt, 1½" phillips oversize pan head, 10-32 thread As used on tweed Fenders |
C | Click for Price |
| Bronze baffle mounting bolt as used on tweed Fenders, 1" phillips pan head, 6-32 thread | D | Click for Price |
| Handle bolt, 1" 10-32 phillips oval head, chrome finish | E | Click for Price |
| MarshallTM chassis screw, 1" phillips oval head | F | Click for Price |
| Speaker mounting studs, 1¼" phillips head, 8-32 thread, wood screw threaded collar | G | Click for Price |
| #6 Screw, 1 1/8" phillips oval head w/ unthreaded shoulder As used on Fender® rear panels |
J | Click for Price |
| #6 Screw, 1 1/4" phillips oval head, w/ unthreaded shoulder As used on Fender® rear panels |
Click for Price | |
| #6 Screw, 1 1/4" phillips oval head, full thread As used on Fender® rear panels |
Click for Price | |
| #8 Screw, 1 1/4" phillips oval head, w/ attached fancy finish washer As used on many Silverface Fender® rear panels |
Click for Price | |
| #8 Screw, 3/4" phillips oval head As used on Fender® corner protector screw |
K | Click for Price |
| #8 Screw, 1" phillips flat head As used on Fender® sphinx glides (amp feet) |
Click for Price | |
| #8 Screw, 1 1/2" phillips oval head As used on Fender® extension speaker cabinet backs |
H | Click for Price |
| #8 Screw, 1 3/4" phillips oval head As used to attach Fender® speaker baffles |
I | Click for Price |
| #10 Screw, 1" phillips oval head As used to attach Fender® dog bone handles and Tilt-back leg stops |
I | Click for Price |
| T-Nut, 10-32, Handle bolt for use on Fender® black strap handls | L | Click for Price |
| Nut, Standard, 6-32 thread | Click for Price | |
| 8-32 Keps Nut/Lock Washer, for use w/ chassis bolts and speaker studs | M | Click for Price |
| 10-32 Keps Nut/Lock Washer, for use w/ tweed chassis bolts | M | Click for Price |
| #6 counter sink washer | Click for Price | |
| #6 Finish washer | O | Click for Price |
| #8 Finish washer | N | Click for Price |
| Item | Style | Price |
|---|---|---|
| Terminal Strip, 3 solder lugs, one mounting tab | Click for Price | |
| Terminal Strip, 6 solder lugs, two mounting tabs | Click for Price | |
| Terminal Strip, 8 solder lugs, two mounting tabs | Click for Price | |
| Potentiometer Nut | A | Click for Price |
| Jack/Pot Chrome Washers, As used on 60's & 70's Fenders® | B | Click for Price |
| Potentiometer lock washer, inside tooth | C | Click for Price |
| #8-32 Screw, phillips pan head, 3/8" long as used on Fender® cap covers and eyelet boards |
D | Click for Price |
| Hex Standoff, 8-32 thread, 1/4" | E | Click for Price |
| Hex Standoff, 8-32 thread, 1/2" | E | Click for Price |
| Hex Standoff, 8-32 thread, 3/4" long | F | Click for Price |
| Hex Standoff, 8-32 thread, 1" long | F | Click for Price |
| Nylon bushing, 3/8" outside diameter, 1/4" inside diameter | G | Click for Price |
| Rubber grommet, 3/16", 1/4" or 3/8" inside diameter | H | Click for Price |
| Grounding Lug, angled, 1 or 2 holes | I | Click for Price |
| 5/16" or 3/8" Hole plug | J | Click for Price |
| 1/2" Hole plug | J | Click for Price |
| 5/8", 7/8", or 1" Hole plug | J | Click for Price |
| 6-32 Machine screw, 1/4", 3/8", 1/2" or 3/4" length, slotted | K | Click for Price |
| 8-32 Machine screw, 1/4", 3/8", 1/2" or 3/4" length, slotted | L | Click for Price |
Showman, Princeton, Super Reverb, Twin Reverb, Vibro Champ, Vibrolux, Bandmaster, Bronco, Vibrolux Reverb, Tremolux are registered or common law trademarks of the Fender Musical Instruments Corp. Ampwares is in no way affiliated with FMIC.
Copyright © Ampwares 1999